98-140012-H To unpack and assemble the EXPLORER 710 8
Chapter 2
To get started
2
This chapter describes:
• To unpack and assemble the EXPLORER 710
• Cable connections
• To start up the EXPLORER 710
• To connect to the WLAN interface
• To connect to the LAN interface
• To connect your phone to the EXPLORER 710
• To make the first call or data session
• Fixed antenna installation
To unpack and assemble the EXPLORER 710
Initial inspection
Inspect the shipping carton immediately upon receipt for evidence of damage during
transport. If the shipping carton is severely damaged or water stained, request that the carrier's
agent be present when opening the carton. Save the carton packing material for future use.
After unpacking the system, inspect it thoroughly for hidden damage and loose components or
fittings. If the contents are incomplete, if there is mechanical damage or defect, or if the
system does not work properly, notify your dealer.
What’s in the delivery
The following items are included in the delivery:
• EXPLORER 710 terminal including transceiver, antenna and antenna cable
•Battery pack
• AC/DC adapter
• Getting started kit including:
• Ethernet/ISDN cable, 2 m screened
• Getting started booklet
WARNING! To avoid electric shock, do not apply power to the system if there is
any sign of shipping damage to any part of the front or rear panel or the outer
cover. Read the safety summary at the front of this manual before installing or
operating the system.
To Next Page
Loading...