Chapter 4: To use the web interface
98-140012-H To use the logs 61
To use the logs
To access the logs
To access the Logs, select and select Logs from the menu. The Logs page contains:
• Call log: A list of all incoming, outgoing and missed calls since the log was last cleared.
• Data log: A list of all data sessions since the log was last cleared.
• Total counters: Totals for each type of service since the log was last cleared.
Date and time is the international UTC time, received from the satellite.
Call log
The Call log shows:
• Outgoing calls shows the start time, receiving end phone number, duration, type
(Standard voice or 3.1 kHz audio) and, if Call charges have been entered, estimated charge
of each outgoing call.
• Received calls shows the start time, calling phone number, duration and type (Standard
voice or 3.1 kHz audio) of each incoming call.
• Missed calls shows the start time, calling phone number and type (Standard voice or
3.1 kHz audio) of each incoming call that was not received.
The Call log also shows the termination cause of each call.
To clear the Call log, click the Clear call log button at the top.
Data log
The Data log shows:
• Data usage (bytes), date and time and estimated charge of each Standard data session (if
Call charges have been entered).
• Duration and type (such as 64 kbps, 128 kbps), date and time and estimated charge of each
Streaming data session (if Call charges have been entered).
• Data usage, date and time of each cellular data connection.
The Data log also shows the termination cause of each data session.
To clear the Data log, click the Clear data log button at the top.
To Next Page
Loading...
