Chapter 4: To use the web interface
98-140012-H To point the antenna (BGAN) 54
To point the antenna (BGAN)
Before you can use the BGAN network, you must point the antenna in the direction of the
satellite and find the best possible signal strength. For detailed information on the pointing
procedure, see To point the antenna (BGAN) on page 17.
You can use the web interface to help you with the pointing process.
Pointing in web interface
To start the pointing process from the web interface, do as follows:
1. If the pointing process is not automatically started, select
(Control panel) and then
Point now.
The signal strength is shown on the screen.
2. Turn and tilt the antenna slowly until you have obtained the highest possible signal
strength.
3. Click OK.
The terminal will now try to register on the BGAN network.
To Next Page
Loading...
