Chapter 4: To use the web interface
98-140012-H Advanced settings 92
Advanced settings
First time use
The first time you access the EXPLORER 710 web interface the administrator password is
disabled, so you have access to all settings. If you want to use an administrator password, you
can enable it as described in the next section.
Administrator password
To enable the administrator password
If the administrator password is disabled and you want to protect the advanced settings with a
password, do as follows:
1. From the Control panel
, select Advanced.
2. Select Passwords > Enable administrator password.
3. Type in the administrator password you want to use.
4. Repeat the new password on the next line.
5. Click Save.
To disable the administrator password
If you want to disable the administrator password, do as follows:
1. From the Control panel
, select Advanced.
2. If you are not already logged in, enter the administrator password and click Login. The
default password is admin.
3. Select Passwords > Disable administrator password.
All settings are now available without password protection.
To log in
If the administrator password is enabled, the Advanced settings require an administrator
password. To log in as administrator, do as follows:
1. From the Control panel
, select Advanced.
If you are not logged in as administrator you are now prompted to log in.
2. Enter the Administrator password. If you have forgotten the administrator password, you
can reset the password. For details, see To reset the administrator password on page 72.
The old user name and password will apply until you have finished the reset procedure.
3. Click Login.
To Next Page
Loading...
