COBHAM Explorer 710 - Features and Interfaces

Chapter 1: Introduction to EXPLORER 710
98-140012-H Features and interfaces of the EXPLORER 710 2
Features and interfaces of the EXPLORER 710
Features
 Full duplex, single or multi-user, standard data up to 492 kbps
 Support for streaming data at 16, 32, 64, 128, 176, 256 kbps, HDR (asymmetric or
symmetric) and BGAN X-Stream.
 Support for bonding of two EXPLORER 710 terminals, providing streaming rates over 1
Mbps for UDP traffic.
 Standard LAN w. PoE, WLAN, ISDN and Phone ports and USB Host interface.
 Detachable antenna with integrated transceiver stand and transceiver-to-antenna range up
to 100 m/328 ft.
 Support for EXPLORER Cellular Modem for connection to cellular network.
 Built-in DHCP/NAT wireless router.
 Solar panel direct interface.
 Support for battery hot swap.
 10-32 VDC input.
 100-240 VAC power adapter.
 Support for GPS or GLONASS navigation systems.
 Built-in web interface allowing you to manage your calls and customize the terminal to your
specific needs, using a smartphone, computer or tablet.
 Support for the EXPLORER Connect smartphone app allowing you to use your phone as a
satellite phone and to access the settings of the terminal.
 Advanced network management.
 Dedicated connections (BGAN only)
 Point-to-Point Protocol over Ethernet (PPPoE).
 Built-in PBX and SIP server managing voice communication.
 Remote management and remote access.
 Multilingual user interface (English, French, German, Russian, Spanish, Chinese, Japanese).
 CE, FCC, GMPCS and IC certified