Chapter 4: To use the web interface
98-140012-H Advanced settings 99
Data limits
You can set a limit for the use of BGAN data services with the EXPLORER 710 system.
If you have entered the BGAN call charges in the menu Call charges, the system
automatically calculates and displays the maximum charges for your BGAN data sessions.
Once the entered limit is reached, the connection is automatically stopped. This is recorded in
the data log. To continue using the data service you must start a new connection by clicking on
the desired connection on the startup page.
To set data limits, do as follows:
1. Under Advanced, select Data limits.
2. Select the type of connection you want to limit.
3. Type in the amount of data or time allowed and select the appropriate units.
4. Select Enable.
5. Click Save to save the settings.
Call charges
If you know the tariff for your subscribed BGAN services, you can enter these tariffs in the web
interface and automatically calculate the estimated charges for your BGAN calls and data
sessions. To enter the call tariffs, do as follows:
1. Under Advanced, select Call Charges.
2. Select the currency from the Displayed currency drop-down list.
3. Enter the tariff for each of the BGAN services.
4. Click Save.
The entered tariffs are used for estimating the charges for calls and data sessions over the
BGAN network. For further information, see Call log on page 61.
Thrane & Thrane A/S does not take responsibility for the correctness of the estimated
charges. This calculation is only a rough estimate of the charge, based on the tariff
entered by the user. Also, the airtime provider may have different methods of
calculating the charge.
If you have enabled automatic activation of the Standard data connection and you
set a data limit for the Standard data connection, automatic activation is disabled.
Thrane & Thrane A/S does not take responsibility for the correctness of the estimated
charges. This calculation is only a rough estimate of the charge, based on the tariff
entered by the user. Also, the Airtime Provider may have different methods of
measuring the airtime used.
To Next Page
Loading...
