Appendix B: Command reference
98-140012-H SMS remote commands 148
Parameter Values Meaning
<wakeup> 0
1
NA
Set to NA. This parameter must be present, but is ignored because the
EXPLORER 710 does not support wake up functions.
<wanmode> 0
1
2
3
4
5
6
7
8
Cellular modem if available at power-up
User selection
BGAN only
Cellular modem only
Not valid for EXPLORER 710
Not valid for EXPLORER 710
Not valid for EXPLORER 710
Not valid for EXPLORER 710
Not valid for EXPLORER 710
<wdog_enable> 0
1
NA
Disabled.
Enabled.
Placeholder when no value is specified. The existing setting applies. Used if
you want to change one of the other parameters without changing the
enabled/disabled setting.
<wdog_op> 1
2
Get watchdog configuration.
Set watchdog parameters.