Appendix B: Command reference
98-140012-H AT commands 159
<protocol
number>
<protocol
number>
This number is uniquely assigned for the protocol being used. TCP is set to
6, and UDP is set to 17. The protocol number determines which protocol is
used by the traffic flow filter (0-255).
<source address
and subnet
mask>
<source address
and subnet
mask>
This is an IPv4 IP address and subnet mask (0.0.0.0.0.0.0.0 to
255.255.255.255.255.255.255.255). The first four numbers are the IP
address and the last four numbers are the subnet mask.
<source port
range>
<source port
range>
Source port range in the form From.To.
See <destination port range> for example.
<state> 0
1
Deactivate.
Activate.
<Traffic Class> 1
3
Streaming (not available for M2M subscription).
Standard data (Background).
<Transfer delay> 0
500
4000
0 ms, error correction is determined by the network
500 ms, error correction is disabled
4000 ms, error correction is applied
Parameter Values Meaning
To Next Page
Loading...
