Chapter 3: To use the EXPLORER 710
98-140012-H Data connection with computer, smartphone or tablet 36
No further configuration is needed to make a Standard IP data connection to the Internet.
See the table below for information on how to configure specific services for your PPPoE
connection.
If you need a certain service, for example a Streaming class, you must type in a specified text
string when asked for a service name. The following table shows the service names supported
by the terminal.
Text to type in the Service
Name field
Function
(Blank) Initiates a Primary Standard Data connection (default)
XBB:BACKGROUND Initiates a Primary Standard Data connection (same as blank)
XBB:STREAM16K Initiates a Primary Streaming 16 kbps connection
XBB:STREAM32K Initiates a Primary Streaming 32 kbps connection
XBB:STREAM64K Initiates a Primary Streaming 64 kbps connection
XBB:STREAM128K Initiates a Primary Streaming 128 kbps connection
XBB:STREAM176K Initiates a Primary Streaming 176 kbps connection
XBB:STREAM256K Initiates a Primary Streaming 256 kbps connection
XBB:X-STREAM Initiates a Primary X-Stream connection
(from a minimum of 384 kbps up to approximately 450 kbps)
XBB:HDR_STREAM416K Initiates a Primary Streaming 416 kbps (½HDR) connection
XBB:HDR_STREAM896K Initiates a Primary Streaming 896 kbps (HDR) connection
XBB:HDR_STREAM416K_64K Initiates a Primary Streaming 416 kbps (½HDR) upload and
64 kbps download connection
XBB:HDR_STREAM896K_64K Initiates a Primary Streaming 896 kbps (HDR) upload and
64 kbps download connection
XBB:<AT String> This allows the PPPoE clients to enter a full AT context
activation string.
Examples:
XBB:AT+CGDCONT=1,ip,”bgan.inmarsat.com”
XBB:AT+CGEQREQ=1,1,64,64,64,64
To Next Page
Loading...
