Chapter 4: To use the web interface
98-140012-H Status information 59
Position information:
• Status: Shows the status of the GNSS connection, e.g. if there is 2D fix, 3D fix or no fix.
• Position: The geographic position of the EXPLORER 710.
• GNSS: Shows which GNSS system is currently used to obtain the position.
• Satellites used: Shows how many GNSS satellites are used to obtain the position.
Data information (only shown if a data connection is running)
• EXPLORER Cellular Modem: Shows which type of data is running on the cellular
connection.
• Standard data (or other connection package name): Shows which type of data is running
within the connection package. A connection package may have more connections
running simultaneously. For details on connection packages, see To set up your data
connection packages on page 79.
Call information (only shown if a voice call is ongoing)
• Status: The status of the call, e.g. “Connected” or “Ringing...”.
• Call type: Shows whether the call type is Standard voice or Premium voice (3.1 kHz
Audio).
• Call duration: The duration of the call.
• Originator: The phone number from which the call was made.
• Receiver: The phone number that receives the call.
To Next Page
Loading...
