MBF-40 SMR700/SMR800 PS REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless – Coverage Date: 28-Jan-16 www.cobham.com/wireless
Doc. No. 00046UM Rev. 2.1
Page | 51
4.5.2 User Access Levels
In this generation of the system, standard users can be promoted to login via the Web Interface,
inheriting the Read-Write or Read-Only access to this interface.
There are five different access levels:
Access Level Default User Levels
Read-Only axell, omcuname, useradmin, sysadmin
Read-Write axell, omcuname, useradmin, sysadmin
Web axell
User Administrator omcuname, useradmin, sysadmin
System Administrator omcuname, sysadmin
Note: New users added to the system have read-only access.
Users may be promoted to read-write and/or web access using the ACT USERPROMOTE command.
See Common Commands and Attributes document for details on promoting users.
Note: Users omcuname, sysadmin and useradmin cannot be promoted to Web Access due to security reasons.
4.5.3 Change Password
To prevent unauthorized access, it is highly recommended to change the default password of the
user.
NOTE: Note that you can only change the password for the User Name with which the session was accessed.
To change the Password
1. In the Main menu, click the Config button.
2. Click the Change Password button.
3. For the current User Name (e.g. axell):
• Enter the New password.
• Repeat the entry.
4. Click Apply.
NOTE: The password is not encrypted during transmission. If the connection to the repeater is not safe, do not
use this screen. Use the CLI commands using an encrypted connection, if possible (i.e. SSH).
To Next Page
Loading...
General