MBF-40 SMR700/SMR800 PS REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
www.cobham.com/wireless Date: 28-Jan-16 Cobham Wireless – Coverage
Page | 42
Rev. 2.1 Doc. No. 00046UM
3.3.4 Integration into the AEM
NOTE: Integration into the AEM is only performed from the AEM side – no action is required from the MBF-40
side.
The AEM automatically connects to the repeater and downloads all the repeater information. The
AEM then configures the repeater with the IP address where alarms and reports should be sent to,
and optionally with a secondary IP address where the repeater can connect to in case connection to
primary IP fails.
When heartbeat reports and alarms are sent from the repeater to the AEM also the latest information
about the status and RF-configuration is included. This means that the AEM operator always has
information about the current status in the AEM database (and does not need to call the repeater to
find this out).
NOTE: Once the repeater is integrated to the AEM, all changes to the repeater should preferably be done from
the Element Manager in order to ensure that the database always contains correct information.
3.3.5 What Next?
The MBF-40 unit is now ready for operation. You may monitor the unit's general status via the OMU
II Main window and if the node is faulty (red LED), access the dedicated configuration screen in
Basic or Advanced view for more information.
NOTE: Consult the OMU II User Manual for additional information on RF and Optical adjustments.
To Next Page
Loading...
General