Settings
98-175666-D Chapter 3: Setup of the antenna 3-24
Diagnostics report
This report contains information from the ADU and BDU that are relevant for the
service personnel during troubleshooting. You can send automatically generated
diagnostic reports at fixed intervals. It is also useful documentation of the current
setup and contains all parameters set during configuration. The main sections of the
diagnostics report are:
• Software
• System
• Hardware
• Setup - System data
• Calibration - Calibration Data
• Blocking zones - Blocking zone configuration
• Network - LAN Configuration
• Modems - Modem profiles
• Satellites - Satellite profiles
• Operation - Current modem and navigation parameters.
• POST - results of the Power-On-Self-Test
• Active Events - lists the currently active events
• Events - List of all cleared events.
• System log
To set up sending a diagnostics report, do as follows:
1. Click Settings > IoT & Management.
2. In the section Diagnostics report enter the following:
• E-mail sender.
• E-mail recipients (comma separated).
• Send interval: Select Daily, Weekly or Monthly.
3. Click Apply.
Statistics report
This report contains historical information from the SAILOR XTR GX-R2 of up to 1
month. It is sent as a zipped attachment to an e-mail. The report contains data for the
selected download intervals. The file format is a comma separated value file (csv). The
report can then be processed in spreadsheet applications, e.g. Microsoft Excel.
To set up sending a statistics report, do as follows:
1. Configure e-mail first, see E-mail setup (secure e-mail) on page 3-22.
2. Go to Settings > Reporting.
3. In the section Statistics report enter the following:
• Email sender.
• Email recipients (comma separated).
• Send interval: Select Daily (2-minute samples), Weekly (hourly samples) or
Monthly (hourly samples).
4. Click Apply.
To Next Page
Loading...
Need help?
General
