Codan 8528 Series - Page 110

Using tone call
Outback HF Radiophone 8-5
Step Action… Display shows… Remarks…
10.
Steps 6 to 9 are
repeated by the
Radiophone for
t2, t3 and t4.
The display shows the
same as in steps 6 to 9,
except for the tone and
frequency numbers.
When all four tone pairs
are recorded, the display
returns to the first set-up
option
11.
Press
On/Off
This turns your
Radiophone off and
registers all the tone call
settings you have just
made.
q