Codan 8528 Series - Checking if a Channel Is Enabled for Selective Call

Using selective call
Outback HF Radiophone 5-9
Checking if a channel is enabled for selective call
A channel must be enabled for the selective call facility to operate. If the channel you
wish to use has not been enabled, refer to the procedure Enabling a channel for
selective call on page 5-12.
Step Action… Display shows… Remarks…
1.
Press and hold
Channel
Select
An S in the left hand
position of the options
bar indicates that the
channel is enabled for
selective calling.
2.
Release
Channel
Select
The display will return to
its original display in
approximately one
second.
q