Using selective call
5-10 Outback HF Radiophone
Selective call mute enable or inhibit
This facility enables or inhibits the operation of the S’Call Mute button. When S’Call
Mute is inhibited you cannot operate selective call mute.
Step Action… Display shows… Remarks…
1.
Turn the
Radiophone off
and move the
control head panel
link from position
E to position 1.
No display. Before moving the link,
note its original position.
Refer to section 11,
Changing the position of
the control head link.
2.
Hold down
S’Call
Mute
and press
On/Off
Hold the S’Call Mute
button down until the
display shows
Repeatedly pressing
S’Call Mute will switch
between ENAbLE and
inhib (inhibit).
3.
Press
S’Call
Mute
Stop at the selection you
require.
4.
Press
On/Off
No display. The Radiophone is now
switched off.
F
Step Action… Display shows… Remarks…
To Next Page
Loading...
Need help?
General
