Codan 8528 Series - Setting Tone Calls

Using selective call
5-8 Outback HF Radiophone
10.
Press
Enter
This sets the new beacon
setting and moves to the
next feature (tone
calling).
For more information on
tone calling, refer to
section 8, Using tone
call.
Setting tone calls
11.
This procedure is
not required at
this time.
This procedure is
covered in detail in
section 8, Setting up tone
call.
12.
Press
On/Off
This turns your
Radiophone off and
registers all the selective
call settings you have just
made.
q