Outback HF Radiophone 12-1
12. Display messages
In addition to showing the normal channel information, the
display is able to show messages indicating the results of an
operation, such as an operator error or a system error.
These error or fault messages are generally accompanied by one
or more ’beeps’.
If a Radiophone fault is indicated, the Radiophone must be
switched off and tried again. If the fault re-occurs the
Radiophone must be sent to Codan, or a Codan agent, to have
the fault rectified.
Messages will be displayed for five seconds and then normal
operation will be resumed. Pushing any button or the
microphone PTT button during this five second period will
immediately restore normal operation.
To Next Page
Loading...
