Codan 8528 Series - Selective Beacon Mode

Using selective call
Outback HF Radiophone 5-27
Selective beacon mode
Step Action… Display shows… Remarks…
1.
Ensure your
Radiophone is
switched on.
The last channel selected.
2.
Select the
required test
channel and tune
the antenna.
Refer to section 4,
Selecting channels.
3.
Press
Call
Selective
When this button is
pressed, the S’Call Mute
is automatically switched
off.
4.
Use the numeric
buttons to enter
the required
selective call
address number.
This allows you to send a
selective call to a station
whose address number is
1374.
F