Codan 8528 Series - Page 112

Using tone call
Outback HF Radiophone 8-7
Step Action… Display shows… Remarks…
4.
Press
Call
Selective
Repeat this action
until a ’t’ and the
required tone pair
appear in the left
hand two spaces
of the options bar.
An example for tone pair
t3.
You will hear a ’pip’.
5.
Press
Enter
You will hear a ’pip’.
6.
Use the numeric
buttons to enter
the channel
number you wish
to use.
You will notice that the
display automatically
inserts a ’P’ to the
number.
7.
Press
Enter
If the channel is already
used the display shows
F