Making a telephone interconnect call
Outback HF Radiophone 9-13
Step Action… Display shows… Remarks…
4.
Use the numeric
buttons to enter
the number you
require between 0
and 9.
After one second the
display changes to
This example shows the
recall number t1, and the
telephone number to call
as 08 336 0311.
5.
Check that the
channel is free
from traffic, then
press
Call
Selective
The Tx indicator lights
and you will hear a
warbling sound for
approximately 10
seconds as the
Radiophone sends your
call.
If the call is received
successfully by the IPC-
500, you will here a
revertive tone then there
will be a pause while the
number is being dialled.
Once the number has
been dialled by the IPC-
500, you will hear the
appropriate telephone
network service tones.
F
To Next Page
Loading...
