Making a telephone interconnect call
Outback HF Radiophone 9-21
Step Action… Display shows… Remarks…
2.
Press
Call
Selective
The transceiver
automatically selects the
correct channel, and
displays the self
identification address
(1234) of the caller.
3.
Press
Enter
4.
Check that the
channel is free
from traffic, then
press
Call
Selective
The display does not
change.
The Tx indicator lights
and you will hear a
warbling sound for
approximately 10
seconds as the
Radiophone sends your
call.
If the call is received
successfully by the IPC-
500 you will here a
revertive tone, then there
will be a pause while the
number is being dialled.
Once the number has
been dialled by the IPC-
500, you will hear the
appropriate telephone
network service tones.
F
To Next Page
Loading...
