Codan 8528 Series - Page 175

Display messages
12-6 Outback HF Radiophone
No. of ’beeps’ Message displayed Meaning
0
A call has been received on another
channel. Display shows call on
channel 400 and frequencies.
0
An ARQ call has been received. In
this example, on channel P2 the
frequency is 12.340 MHz.
1
Indicates that no telephone numbers
have been stored.
1
A request to store a frequently used
telephone number as a single digit.
1
This is not an OTC channel and OTC
functions do not operate.
0
Indicates that your Radiophone is
switched on and in the Mute set-up
mode.
1
Indicates that your Radiophone is
switched on and in the Antenna select
output mode.
1
Indicates that your Radiophone is
switched on and in the Frequency
band operation mode.
q