Contents
Outback HF Radiophone iii
Returning a received call–general........................................5-20
Reviewing the list of received calls in memory ...................5-21
Reviewing calls held in memory....................................5-22
Recalling calls held in memory......................................5-24
Using the beacon feature......................................................5-25
Selective beacon mode...................................................5-27
(99) beacon mode...........................................................5-29
Using the external alarm feature..........................................5-31
Testing the selective call functions......................................5-32
6. Using the receiver in scan mode ..................................6-1
Scan mode terms....................................................................6-2
Setting up the scan mode.......................................................6-3
Programming the channels to be scanned..............................6-5
Receiving in scan mode.........................................................6-7
Start scanning...................................................................6-7
Stop scanning...................................................................6-7
Changing the scan mode...................................................6-8
Using selective call in scan mode ........................................6-10
Programming frequency band scan......................................6-12
Scanning frequency bands ...................................................6-16
Deleting unwanted scan channels ........................................6-18
7. Programming channels .................................................7-1
Setting up the P-channel inhibit options ................................ 7-2
Checking if the inhibit link is fitted to the PCB ...............7-3
Changing the inhibit options ............................................7-4
Copying channels to P-channels ............................................7-6
Creating receive only P-channels...........................................7-9
Deleting unwanted P-channels.............................................7-11
Programming display messages...........................................7-12
Setting up temporary channels.............................................7-14
To Next Page
Loading...
Need help?
General
