Codan 8528 Series - Page 99

Using the receiver in scan mode
Outback HF Radiophone 6-13
Step Action… Display shows… Remarks…
2.
Using the numeric
buttons, enter the
start frequency to
the nearest 100
Hz.
This is an example of
selecting a band scan to
start at 4000 kHz.
3.
Press
Enter
The decimal points are
automatically entered by
the Radiophone.
4.
Enter the stop
frequency to the
nearest 100 Hz.
This is an example of
selecting a band scan to
stop at 5000 kHz.
5.
Press
Enter
6.
Press
2
Slow
or
1
Fast
S indicates the slow rate
of scan (100 Hz steps).
F indicates the fast rate
of scan (1 kHz steps).
F