13 http://www.codelight.com
4. Preset
Party 600 has 4 Preset pages, each of which has 10 Preset buttons. User can save totally 40 preset data, which
named "Preset Table". You can set one or more dimmer values, and one or more channel attribute values of
fixture to one preset button, which can be used quickly during live show or programming.
After saved the preset, you can press Preset button directly to quickly move the channel values, such as
Brightness, Color, Gobo and Pan/Tilt position.
Example:
Save red of fixtures to the Preset section.
Adjust the selected fixtures attribute channel of Color to Red as the way of manually-controlling fixtures,
if there are several kinds of fixtures have been selected, you need to adjust them respectively.
After finishing the edition, re-select those fixtures (their Unit buttons are on);
Press Edit Preset to enter “Edit Preset” mode, The led of the Preset buttons carrying data will twinkle;
Press S1 [Change CH];
Select a Preset button in the Preset section to save the preset data (the led off means the Preset buttons is
empty);
Press S1 and select [Confirm] to save the data.
To Next Page
Loading...
Need help?
General