27 http://www.codelight.com
9. File management
You can insert USB flash drive into the USB jack of the Party 600 and backup the program to the USB flash
drive.
Suggestion: you'd better backup the data after you finish programming. It's advisable habit to backup the
documents. Once the unpredictable accidents happened, you can resume it by the backup documents in the
USB flash drive.
Before you perform the following operations, you need to insert the USB flash drive into the USB jack of the
console, (extended line is permitted). Meanwhile, you need to insure the USB flash drive is in the FAT format;
otherwise you need to format the USB flash drive by FAT via PC.
9.1. Upload Show File
The show file includes all the user setting, Preset data and performing program of the console. The file is user
via backup the show file that saved in the USB flash drive.
Insert the USB flash drive into the USB jack at the back of the console;
Press Setup to enter "Supervise Menu";
Press S1 to enter [FileSystem] and wait until the console list the documents in the USB flash drive;
Press S1 to enter [Load Show] and use the Up and Down cursors to select the needed Show document,
whose extended name is SHO;
Press S1 and [Load Show] to upload the data to the console;
Press Setup to exit after finish.
9.2. Backup Show File
Insert the USB flash drive into the USB jack at the back of the console;
Press Setup to enter "Supervise Menu";
Press S1 to enter [FileSystem] and wait until the console list the documents in the USB flash drive;
Press S2 to enter [BackupShow], you will be asked to input the name of Show backup document, which
at most can be input 8 numbers or letters;
Press S1 and [Confirm] to start the backup after enter the name of the document;
Press Setup to exit after finish.
9.3. Utilities of USB Flash Drive
Press Setup;
Press S1 and enter [FileSystem];
Press S3 and enter [Utilities];
Now, the LCD screen will display 3 functions, which will be introduced as follows: