29 http://www.codelight.com
10. Setup the System
The update of the software of the console and the elimination of internal data will be introduced in this part.
10.1. Data Clear
You can clear the internal data of the console, except Fixture Library.
Press Setup;
Press S3 and enter [System];
Press S1 and select [Clear Data];
There are 4 functions as followed you can choose to operate:
10.1.1. Clear all Data
Note: All the internal data, including Patch, Preset and Playback of the Units will be cleared, but the
uploaded library!
Press S1 and select [Clear All];
Press S1 to [Confirm] clear.
10.1.2. Clear All the Preset Data
It is use for clearing all the preset data.
Press S2 and select [Clr Preset];
Press S1 to [confirm] clear.
10.1.3. Clear All the Playback data
It is use for clearing all the playback data.
Press S3 and select [Clr PLBK];
Press S1 to [confirm] clear.
10.2. User Setup
Language setup and MIDI are two parts of User Setup.
10.2.1. Set Up Language
Press Setup;
Press S3 and select [System];
Press S2 and select [User setup];
Press S1 and select the language displayed on the LCD screen.
To Next Page
Loading...
Need help?
General