Horizon Imager User’s Manual 10-11
3UHYHQWLYH0DLQWHQDQFH
10. From the Open Top Cover menu, select the
5RWDWH3ODWHQ
option.
The Rotate Platen menu is displayed.
11. Using the platen roller cleaning wipe, rub the pad along the
entire length of the platen from end to end until all visible
contaminants are gone. Do not rub back and forth.
Press the and keys to rotate the platen so that you can
clean its entire surface.
12. Wait for the platen and donor guide bar to dry thoroughly.
If you need to reload the color ribbon, go to step 13. Otherwise
go to step 15.
7,3
&OHDQLQJWKHWKHUPDOSULQWKHDGDQGQRVHSLHFHZKLOHWKHWRSFRYHULVRSHQ
,I\RXZDQWWRFOHDQWKHWKHUPDOSULQWKHDGDQGQRVHSLHFHZKLOHWKHWRSFRYHULVDOUHDG\
RSHQUHIHUWRVWHSV WKURXJKLQWKHSURFHGXUHLQ³&OHDQLQJ3ULQW+HDGDQG1RVHSLHFH´
RQSDJH
13. To reload the color ribbon, go to the Move Ribbon Carriage
menu and press the key to move the ribbon carriage up so
you can reload the ribbon.
0HQX
2SHQ7RS&RYHU
5RWDWH3ODWHQ
5RWDWHVSODWHQIRUZDUG
5RWDWHVSODWHQEDFN
5RWDWHSODWHQWRDFFHVVIRU
FOHDQLQJ
&OHDQSODWHQE\DOWHUQDWHO\
URWDWLQJZLSLQJHQGWRHQG
3UHVV0(18WRH[LWPHQXV
&$87,21
8VHRQO\WKHSODWHQUROOHUFOHDQLQJZLSHZKHQFOHDQLQJWKHSODWHQ7KH
SODWHQUROOHUFRXOGEHGDPDJHGLI\RXXVHWKHSULQWKHDGFOHDQLQJZLSH
/