23 | P a g e
Shift among these three working statuses:
In embroidery ready status ( is displayed in the main interface), if users have selected pattern
and related parameters, press and then press to confirm, and the system will enter embroidery
confirmation status ( is displayed in the main interface). At this time, press start key to start
embroidery, when the machine is under embroidery running status ( is displayed in the main interface).
In embroidery running status ( is displayed in the main interface), press stop key to stop
embroidery and return to embroidery confirmation status, where user can press start key again to enter
embroidery running status.
In embroidery confirmation status ( is displayed in the main interface), press and then
press to confirm, user can release the confirmation status and return to embroidery ready status (
is displayed in the main interface).
To Next Page
Loading...