63 | P a g e
7.2 Clear XY Displacement
This function is to clear the X and Y displacements.
1. In the main interface , press
2. System will set current X/Y value to 0.
User can check the current X/Y value on the main interface.
7.3 Positioning Idling
This operation can only be undertaken under embroidery confirmation status .
This function can move the frame to certain position without embroidering according to user’s need. User
can select color-changing code or stop code as reference to idle forward (or backward).
7.3.1. Low Speed Idling Forward
1. In the main interface , press
2. Press
To Next Page
Loading...