ColDesi Avance - Create Outline Pattern; Create High-Speed Pattern

47 | P a g e
5.6 Create Outline Pattern
This operation can generate a new pattern based on the outline of the designated pattern.
1. Press to enter memory pattern management interface.
2. Select a pattern in the memory pattern image display area.
3. Press to enter memory operation selection interface.
4. Press “Create Outline Pattern” to enter the operation interface.
5. User can press to input new pattern number and name instead of default ones.
6. Press to create the outline pattern and return to pattern operation selection interface. Press
to quit the creating operation and return to pattern operation selection interface.
5.7 Create High-speed Pattern
This function can be used to divide long stitch into short ones, so as to prevent speed reduction due to long
stitches.
1. Press to enter memory pattern management interface.
2. Select a pattern in the memory pattern image display area.
3. Press to enter memory operation selection interface.
4. Press “Create High-speed Pattern” to enter the operation interface.
5. User can press to input new pattern number and name instead of default ones.
6. Press to create the high-speed pattern and return to pattern operation selection interface. Press
to quit the creating operation and return to pattern operation selection interface.