5.8 Maximum Speed
The Maximum Speed function limits the max. dispensing speed to the entered value. This function is
necessary, if the goods speed is not stable or if labelling is problematic due to difficult label material
with higher speed than usual. For labelling using speed measuring the dispensing speed is limited au-
tomatically to this value.
MAX. SPEED
Value : 50 m/Min
5.9 Good suppression
The Good Suppression function is used, when a good (e.g. cartons for eggs) can supply more than
one start pulse for labelling. Entering can be aborted with the ESC key.
GOOD SUPPRESSION
Length : 100 mm
5.10 Labelling mode
The Labelling mode function allows the choice of three labelling modes:
Normal labelling
Multiple labelling
Delayed predispensing
5.10.1 Normal Mode
As a rule the Normal labelling mode is switched on and it is labelled without any special function.
LABELLING MODE
Choice : Normal
programmer
STOP
User level:
Operating mode:
programmer
STOP
User level:
Operating mode:
programmer
STOP
User level:
Operating mode:
5999.530-01E 14.01.2004 CSWM 4 24
To Next Page
Loading...
