Technical and instalation
manual FLOW 38 Batch Page 34 (of 49) COMAC CAL
s.r.o.
Serial number
The serial number is registered in the factory and cannot be changed by user. Modifications can
only be carried out by an authorized person under production password.
Calibration constants
Calibration constants are registered during the production and cannot be changed by user.
Modifications can only be carried out by an authorized person under production password.
Empty tube test
Activates and deactivates monitoring of measuring tube filling. If the meter was ordered without
the testing electrode, the flooding test cannot be activated.
Firmware version
The firmware version is registered in the factory and cannot be changed by user.
To Next Page
Loading...