39
PERFORMANCE
PERFORMANCEPERFORMANCE
PERFORMANCE
MOVEMENT (machines with traction)
MOVEMENT (machines with traction)MOVEMENT (machines with traction)
MOVEMENT (machines with traction)
These machines are equipped with electronically commanded traction, with
two speeds forwards and one backwards.
To move the machine, it is necessary to act upon the key (1), wait for three
seconds and then rotate forward (forward movement) or backward (rear
movement) the lever (2) on the handle bar. Pushing forward the lever a few
millimetres, the first speed is available, pushing the lever forward
completely, the second speed is obtained.
In reverse motion, the speed movement is reduced.
WARNING!
WARNING! WARNING!
WARNING! When carrying out even short backward
movements, make sure that the squeegee is lifted
.
2
1
BRAKE (machines without traction)
BRAKE (machines without traction)BRAKE (machines without traction)
BRAKE (machines without traction)
The machine is equipped with a braking system controlled through the left
lever (1), which is used as a parking and emergency brake.
1
BRAKE (machines with traction)
BRAKE (machines with traction)BRAKE (machines with traction)
BRAKE (machines with traction)
The machine is equipped with an electronical brake system. To brake in
normal working conditions, it is enough to release the lever on the handle
bar.
In case of need (stop, danger, etc. …), act upon the mechanical brake
pushing downwards the lever (1).
To Next Page
Loading...
