COMAC Simpla - Recovery Tank Cleaning; Suction Filter Cleaning

41
DAILY MAINTENANCE
DAILY MAINTENANCEDAILY MAINTENANCE
DAILY MAINTENANCE
CLEANING RECOVERY TANK
CLEANING RECOVERY TANKCLEANING RECOVERY TANK
CLEANING RECOVERY TANK
1.
Extract the hose placed on the front part of the recovery tank
2.
Unscrew the exhaust plug and empty the tank
WARNING!
WARNING!WARNING!
WARNING! This operation has to be carried out using gloves
to protect from contact with dangerous solutions.
3. Lift the cover of the recovery tank (1)
4.
Take off the suction plug (2) rotating it counterclockwise
5.
Take off the filter and its protection
6.
Rinse everything with a water jet
1
2
CLEANING OF THE SUCTION FILTER
CLEANING OF THE SUCTION FILTERCLEANING OF THE SUCTION FILTER
CLEANING OF THE SUCTION FILTER
1.
Lift the cover
2.
Take off the suction plug by rotating it counterclockwise
3.
Take off the filter
4.
With a water jet clean the walls and the bottom of the filter
5.
Wash thoroughly all components
6.
Reassemble everything