43
DAILY MAINTENANCE
DAILY MAINTENANCEDAILY MAINTENANCE
DAILY MAINTENANCE
REPLACEMENT OF THE SQUEEGEE RUBBERS
REPLACEMENT OF THE SQUEEGEE RUBBERSREPLACEMENT OF THE SQUEEGEE RUBBERS
REPLACEMENT OF THE SQUEEGEE RUBBERS
Check the squeegee rubbers wear and if necessary, change them.
To replace them:
1.
Take off the squeegee hose from its coupling
2.
Push the rocker arm of uncoupling and parade the stud bolt skilful
3.
Remove the squeegee from its support
4.
Loosen the nuts which block the rubber blades and take them off
5.
Replace the rubbers
6.
To reassemble the squeegee repeat the above-mentioned operations inversely
CLEANING OF
CLEANING OF CLEANING OF
CLEANING OF THE BATTERY COMPARTMENT
THE BATTERY COMPARTMENTTHE BATTERY COMPARTMENT
THE BATTERY COMPARTMENT
To empty the battery compartment from possible liquids, use the suitable hose placed
under the solution tank and accessible from the rear part of the machine
.
ATTENTION!
ATTENTION!ATTENTION!
ATTENTION! This operation has to be carried out using gloves to protect
from contact with dangerous solutions. Danger of emission of corrosive
Danger of emission of corrosiveDanger of emission of corrosive
Danger of emission of corrosive
liquids. Fire danger: do
liquids. Fire danger: doliquids. Fire danger: do
liquids. Fire danger: do not approach with free flames.
not approach with free flames.not approach with free flames.
not approach with free flames.
To Next Page
Loading...
