COMAC Simpla - Technical Data

26
On consignment of the machine
On consignment of the machineOn consignment of the machine
On consignment of the machine
When the machine is consigned to the customer, an immediate
check must be performed to ensure all the material mentioned
in the shipping documents have been received and moreover to
find out that the machine has not suffered damage during
transportation. If damage has occurred, get the shipping agent
to verify immediately the amount and nature of the damage
suffered and at the same time informs our claim department. It
is only by prompt action of this type that compensation for
damage may be successfully claimed.
Introductory comment
Introductory commentIntroductory comment
Introductory comment
This is a floor cleaning machine which, using the mechanic
abrasive action of a rotary brush and the chemical action of a
solution water-detergent, is able to clean any type of floor,
picking up during its advance movement, the removed dirt and
the detergent solution which has not been absorbed from the
floor.
The machine must be used only for such purpose
The machine must be used only for such purposeThe machine must be used only for such purpose
The machine must be used only for such purpose. We would
impress upon you that any machine will function efficiently and
operate successfully, only if used correctly and maintained in
fully efficient working order. We therefore suggest you to read
this instruction booklet carefully and re-read it whenever
difficulties arise in the course of machine use. Our Service
Department is at your disposal for all such advice and servicing
as may prove necessary
.
TECHNICAL DATA
TECHNICAL DATATECHNICAL DATA
TECHNICAL DATA U.M.
U.M.U.M.
U.M. SIMPLA45
SIMPLA45SIMPLA45
SIMPLA45 SIMPLA45t
SIMPLA45tSIMPLA45t
SIMPLA45t SIMPLA50
SIMPLA50SIMPLA50
SIMPLA50 SIMPLA50t
SIMPLA50tSIMPLA50t
SIMPLA50t SIMPLA61
SIMPLA61SIMPLA61
SIMPLA61 SIMPLA61t
SIMPLA61tSIMPLA61t
SIMPLA61t
Cleaning width mm 455 455 510 510 610 610
Squeegee width mm 660 660 755 755 755 755
Working capacity, up to sqm/h 1580 1580 1785 1785 2135 2135
Brush diameter mm 1x455 1x455 1x510 1x510 1x610 1x610
Brush speed rpm 250 250 250 250 220 220
Brush pressure kg 25 25 25 25 30 30
Brush motor (power) W 560 560 560 560 560 560
Traction motor (power) W - 150 - 150 - 150
Drive semi-aut. autom. semi-aut. autom. semi-aut. autom.
Movement speed km/h - 0÷3.5 - 0÷3.5 - 0÷3.5
Max. gradient 2% 10% 2% 10% 2% 10%
Suction motor (power) W 350 350 350 350 350 350
Suction vacuum mbar 110 110 110 110 110 110
Solution tank l505050505050
Recovery tank l555555555555
Machine length mm 1300 1300 1300 1300 1400 1400
Machine height mm 1010 1010 1010 1010 1010 1010
Machine width (without squeegee) mm 500 500 560 560 630 630
Voltage V 24 24 24 24 24 24
Batteries Ah/5h 140 140 140 140 140 140
Battery compartment mm 350x380
Batteries weight kg 88 88 88 88 88 88
Machine weight (empty and without batteries) kg 86 93 86 93 100 107
Acoustic radiation pressure level (in conformity with EN dB (A) 70 70 70 70 70 70
Vibration level m/sqs 1.60 1.60 1.60 1.60 1.60 1.60