ComAp InteliDrive FLX LITE - Page 180

ID-FLX Lite Global Guide
180
Setpoint group AIO module Related FW 2.5.0
Range [units] 0 .. 180 [s]
Default value 5 -
Step 1
Comm object 13659 Related applications
Description
Configuration Protection
Under limit Protection is activated only when measured value is under measured level.
Over limit Protection is activated only when measured value is over measured level.
UnderLimit+fls Level 2 protection is activated by sensor fail too.
OverLimit+fls Level 2 protection is activated by sensor fail too.
Note: Plug-in analog inputs protection alarms can be configured following way.
AnlInAIO2 del
6 back to List of setpoints
Setpoint group AIO module Related FW 2.5.0
Range [units] 0 .. 180 [s]
Default value 5 -
Step 1
Comm object 13660 Related applications
Description
Configuration Protection
Under limit Protection is activated only when measured value is under measured level.
Over limit Protection is activated only when measured value is over measured level.
UnderLimit+fls Level 2 protection is activated by sensor fail too.
OverLimit+fls Level 2 protection is activated by sensor fail too.
Note: Plug-in analog inputs protection alarms can be configured following way.
AnlInAIO3 del
6 back to List of setpoints