InteliLite Global Guide
300
Group: CM-RS232-485
Setpoint group CM-RS232-485 Related FW 1.2.1
Range [units] Direct / MODBUS [-]
Default value Direct Alternative config NO
Step [-]
Comm object 24522 Related applications AMF, MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
Communication protocol switch for the COM1 channel.
Direct LiteEdit2015 communication protocol via serial cable.
MODBUS MODBUS protocol.
COM1 Mode
6 back to List of setpoints
Setpoint group CM-RS232-485 Related FW 1.2.1
Range [units] 9600 / 19200 / 38400 / 57600 / 115200[bps]
Default value 57600 bps Alternative config NO
Step [-]
Comm object 24341 Related applications AMF, MRS
Config level Standard
Setpoint visibility
Only if relevant module is installed + conditioned by the setpoint COM1 Mode (page
300)
Description
If the direct mode is selected on COM1 channel, the direct communication speed of controller part of line can
be adjusted here. Speed of second part of line has to be adjusted to the same value.
COM1 Communication Speed
6 List of setpoints (page 150)
To Next Page
Loading...
Need help?
General
