InteliLite Global Guide
333
Setpoint group CM-Ethernet Related FW 1.2.1
Range [units] Valid IP address [-]
Default value 255.255.255.0 Alternative config NO
Step [-]
Comm object 24375 Related applications AMF, MRS
Config level Standard
Setpoint visibility
Only if relevant module is installed + conditioned by the setpoint IP Address Mode (page
332)
Description
The setpoint is used to select the method how the Subnet Mask is adjusted.
If IP Address Mode (page 332) is FIXED this setpoint is used to adjust the Subnet Mask. Ask your IT
specialist for help with this setting.
If IP Address Mode (page 332) is AUTOMATIC this setpoint is inactive. The Subnet Mask is assigned by the
DHCP server.
Subnet Mask
6 back to List of setpoints
Setpoint group CM-Ethernet Related FW 1.2.1
Range [units] Valid IP address [-]
Default value 192.168.1.1 Alternative config NO
Step [-]
Comm object 24373 Related applications AMF, MRS
Config level Standard
Setpoint visibility
Only if relevant module is installed + conditioned by the setpoint IP Address Mode (page
332)
Description
The setpoint is used to select the method how the Gateway IP is adjusted.
If IP Address Mode (page 332) is FIXED this setpoint is used to adjust the IP address of the gateway of the
network segment where the controller is connected.
If IP Address Mode (page 332) is AUTOMATIC this setpoint is inactive. The gateway IP address is assigned
by the DHCP server.
A gateway is a device which connects the respective segment with the other segments and/or Internet.
Gateway IP
6 back to List of setpoints
To Next Page
Loading...
Need help?
General
