ComAp InteliLite MRS16 User Manual

InteliLite Global Guide
334
Setpoint group CM-Ethernet Related FW 1.2.1
Range [units] Valid IP address [-]
Default value 8.8.8.8 Alternative config NO
Step [-]
Comm object 24362 Related applications AMF, MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
The setpoint is used to select the method how the DNS Address 1 is adjusted.
If IP Address Mode (page 332) is FIXED this setpoint is used to adjust the domain name server (DNS), which
is needed to translate domain names in email addresses and server names into correct IP addresses.
If IP Address Mode (page 332) is AUTOMATIC this setpoint is inactive. The DNS server IP address is
assigned by the DHCP server.
DNS IP Address 1
6 back to List of setpoints
Setpoint group CM-Ethernet Related FW 1.2.1
Range [units] Valid IP address [-]
Default value 8.8.8.8 Alternative config NO
Step [-]
Comm object 24331 Related applications AMF, MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
The setpoint is used to select the method how the DNS Address 2 is adjusted.
If IP Address Mode (page 332) is FIXED this setpoint is used to adjust the domain name server (DNS), which
is needed to translate domain names in email addresses and server names into correct IP addresses.
If IP Address Mode (page 332) is AUTOMATIC this setpoint is inactive. The DNS server IP address is
assigned by the DHCP server.
DNS IP Address 2
6 back to List of setpoints

ComAp InteliLite MRS16 Specifications

General

Brand	ComAp
Model	InteliLite MRS16
Category	Controller
Language	English