InteliLite Global Guide
95
Image 5.24 Daily mode - LiteEdit2015
In timer mode select Repeat. In repetition type select Daily. In timer settings adjust date and time of first
occurrence of timer. Also adjust the duration of each occurrence of timer. Than select the x-th day of repetition
(Timer 1 Refresh Period (page 268)) and behavior of timer on weekends (Timer 1 Weekends (page 269)).
Example: On image example first start of timer will be 1/1/2016 at 12:00. Duration will be 1 hour. Timer will
be again activated every 3rd day at 12:00 for 1 hour including weekends.
Set-up via controller interface
In controller go to the Scheduler setpoint group. Select the function of timer via Timer 1 Function (page 264)
setpoint. Than go to Timer 1 Setup and press enter button. In Timer 1 Repetition (page 265) setpoint select
Repeated mode. Than adjust Timer 1 First Occur. Date (page 266), Timer 1 First Occur. Time (page 266) and
Timer 1 Duration (page 266). In setpoint Timer 1 Repeated (page 267) select Daily and adjust Timer 1 Refresh
Period (page 268) (x-th day of repetition) and Timer 1 Weekends (page 269) (behavior of timer on weekends).
Note: Use left and right buttons to move between timer setpoints.
Weekly mode
Set-up via LiteEdit2015
To set-up timer via LiteEdit2015 go to the setpoint ribbon, setpoint group scheduler and setpoint Timer 1 Setup.
Note: First of all function of timer has to be adjusted via setpoint Timer 1 Function (page 264).
To Next Page
Loading...
Need help?
General
