ComAp InteliPro Comprehensive Guide

InteliPro, SW version 1.0, ©ComAp – May 2011
InteliPro Reference Guide
4-18
APN Name
name of APN access point for GPRS network.
APN UserName
user name for APN access point.
APN UserPass
user password for APN access point.
Hint:
All 3 setpoints above shall be provided by GSM/GPRS operator.
AirGate
Communication mode of internet connection
Hint:
You should disable AirGate mode in case you would like to use standard internet connection using IP
address.
AirGate IP
IP address of AirGate server (used in AirGate mode)
SMTP UserName
User name or name of e-mail account for verification of e-mail sender on SMTP server. If parameter
left empty, no verification is expected. Works for IB-Lite only.
SMTP UserPass
User password of e-mail account for verification of e-mail sender on SMTP server. If parameter left
empty, no verification is expected. Works for IB-Lite only.
SMTP Server IP
IP address of SMTP server. Works for IB-Lite only.
Contr MailBox
E-mail address used as “Sender” of alarm e-mails from IB-Lite
Hint:
If SMTP server requires verification of sender, e-mail address has to be registered to SMTP server
and setpoints “SMTP UserName” and “SMTP UserPass” has to be setted to correct values.
Time Zone
List of time zones used for time reference.
DNS IP Address
IP address of Domain Name Server.
General
This group contains general setting of the unit ind its protective functions.
ProtActiv Del [ s ]
Common delay for all protections to activate after CB2 FEEDBACK, CB1 FEEDBACK inputs are
closed.
Step: 0,1s
Range: 0 – 30 s
Default setting: 2,0 s

ComAp InteliPro Specifications

General

Brand	ComAp
Model	InteliPro
Category	Relays
Language	English