Comelit 3360 - 10. Enabling;disabling the screensaver; 11. Changing the keypad sensitivity; 12. Enabling;disabling the keypad tone

EN
17
This function is disabled by default.
If activated, the screensaver will appear after a 30-second
period of inactivity.
1. access programming mode, see page 5
2. select the menu items:
Settings ⇒ Screen saver
10. Enabling/disabling the screensaver
CALL MANAGEMENT
NAME ONLY
WELCOME MESSAGE
SCREEN SAVER
OK OK
SCROLL ESC
The default keypad sensitivity setting is medium.
1. access programming mode, see page 5
2. select the menu items:
Settings ⇒ Keypad sens.
This function is enabled by default.
1. access programming mode, see page 5
2. select the menu items:
Settings ⇒ Keypad tone
11. Changing the keypad sensitivity
KEYPAD SENS.
LOW
*MEDIUM
HIGH
OK OK
SCROLL ESC
12. Enabling/disabling the keypad tone
SCREEN SAVER
YES
*NO
OK OK
SCROLL ESC
NAME ONLY
WELCOME MESSAGE
SCREEN SAVER
KEYPAD SENS.
OK OK
SCROLL ESC
3. press or to confi rm
4. select desired keypad sensitivity using
5. press or to confi rm
» * indicates the selected keypad sensitivity setting
3. press
or to confi rm
4. select YES to enable the function, NO to disable it
5. press
or to confi rm
» * indicates active selection
3. press or to confi rm
4. select YES to enable the function, NO to disable it
5. press or to confi rm
» * indicates active selection
WELCOME MESSAGE
SCREEN SAVER
KEYPAD SENS.
KEYPAD TONE
OK OK
SCROLL ESC
KEYPAD TONE
*YES
NO
OK OK
SCROLL ESC