EN
8
1. Changing the default supercode (778899)
The supercode (778899 is the default code) is used to
access the programming menus.
1. access programming mode, see page 5
2. select the menu items:
Access control ⇒ Supercode ⇒ Enter new code
Access control
ENTER NEW CODE
DEFAULT SETTINGS
OK OK
SCROLL ESC
NEW SUPERCODE:
_A234B
OK
ESC CANC
SUPERCODE
CHANGED
3. press
or to confi rm
4. change the supercode (max. 6 characters consisting of
numbers and/or letters from A to F) using the alphanumeric
keypad
5.
press
to confi rm
4. Clearing the directory
DELETE
ALL NAMES?
OK CANC
DELETION
IN PROGRESS...
ENTER NAMES
DELETE NAMES
CHANGE NAMES
CLEAR ALL NAMES
OK OK
SCROLL ESC
1. access programming mode, see page 5
2. select the menu items:
Name directory ⇒ Clear all names
3. press or to confi rm
4.
press
to confi rm
DELETION
COMPLETE
5. to exit, press
6. to exit, press
To Next Page
Loading...
