EN
13
MARIO ROSSI
CODE: 025 015
SCROLL CALL
CALL USER
_ _ _100
CALL CANC
5. Setting call management
It is necessary to set the type of system (Simplebus
or Simplebus Top) and then the call mode (Standard,
Indirect code, Immotec standard or Immotec indirect).
Type of system:
CAUTION:for correct operation depending on the type
of system installed (Simplebus or Simplebus Top), it is
necessary to set the porter module Art. 1622, Art. 4680,
Art. 4680C to the same mode.
SIMPLEBUS (default) for systems without switching
devices Art. 1424 in Top 1, 2, 3 mode (see FT SB 21,
page 6) which defi ne the system zones.
SIMPLEBUS TOP for systems with switching devices
Art. 1424 in Top 1, 2, 3 mode (see FT SB 21, page 6)
which defi ne the system zones.
Module Art. 3360 in Simplebus Top mode must be used
in conjunction with compatible products (see table
“Simplebus Top products”, page 34).
Call mode:
STANDARD - SIMPLEBUS (default)
In this mode, the user is identifi ed by a Name fi eld and a
Code fi eld no longer than 3 digits (between 1 and 240).
Example:
User name= Mario Rossi
Code= 2
STANDARD - SIMPLEBUS TOP
In this mode, the user is identifi ed by the Name fi eld
(optional) and a Code fi eld consisting of two parts:
zone fi eld with no more than 3 digits (between 1 and
500)
user fi eld which must have 3 digits (between 1 and 240):
Example:
User name= Mario Rossi
Code= 25 015
The call can be made in the following ways:
} standby mode
1A. enter the user code (e.g. 25 015)
1B. or scroll through the directory using
2. to call, press
3. to exit, press
INDIRECT CODE -
SIMPLEBUS or SIMPLEBUS TOP
In this mode the user is identifi ed by a Name fi eld (optional)
and by a Code fi eld which is different for Simplebus and
Simplebus Top, see page 13 and by an Indirect Code with
no more than 6 alphanumerical characters (0...9, A...F).
Example:
User name= Mario Rossi
Code= 2 (for Simplebus) or 25 015 (for Simplebus top)
Indirect code= 100
The call can be made in the following ways:
} standby mode
1A. enter the indirect code (e.g. 100)
CALL USER
_25 015
CALL CANC
1B. or scroll through the directory using
MARIO ROSSI
CODE: 025 015
SCROLL CALL
2. to call, press
3. to exit, press
To Next Page
Loading...
