Comelit 3360 - 3. Deleting a name in the directory

EN
7
CODE:
_ _ 2
OK
ESC CANC
3. Deleting a name in the directory
ENTER NAMES
DELETE NAMES
CHANGE NAMES
CLEAR ALL NAMES
OK OK
SCROLL ESC
11. press to confi rm
12. to exit, press
8. change the name using the alphanumeric keypad, for
the use of special characters see table on page 3
9. press or to confi rm
10. change the code (max. 3 digits) using the alphanumerical
keypad
CAUTION: not available if the call mode is IMMOTEC
STANDARD or IMMOTEC INDIRECT, see page 13
1. access programming mode, see page 5
2. select the menu items:
Name directory ⇒ Delete names
ENTER PART
OF THE NAME
REQUIRED
3. press
or to confi rm
4. enter the name using the alphanumeric keypad, for the
use of special characters see table on page 3
M_
OK
SCROLL CANC
5. to confi rm the fi rst letter of the name, press
6. to display the name that you want to change, scroll
through the directory using
MARIO ROSSI
OK OK
SCROLL ESC
7. to confi rm the selected name that you want to delete,
press
or
8. to exit, press