Comelit 3360 - 2 B. Enabling;disabling the relay contact in parallel to the porter module SE output; 2 C. Viewing the relay contact parameters

EN
23
2B. Enabling/disabling the relay contact in
parallel to the porter module SE output
1. access programming mode, see page 5
2. select the menu items:
Settings ⇒ System parameters ⇒ Speaker parameters
⇒ Advanced options ⇒ Relay contact ⇒ In parallel to
SE
PARAMETER
CHANGED
ACTUATOR FUNCTION
IN PARALLEL TO SE
VIEW
OK OK
SCROLL ESC
IN PARALLEL TO SE
YES
*NO
OK OK
SCROLL ESC
PARAMETER
CHANGED
2C. Viewing the relay contact parameters
1. access programming mode, see page 5
2. select the menu items:
Settings ⇒ System parameters ⇒ Speaker parameters
⇒ Advanced options ⇒ Relay contact ⇒View
ACTUATOR FUNCTION
ACTIVATION TIME 03
IN PARALLEL TO SE
ACTUATOR FUNCTION
IN PARALLEL TO SE
VIEW
OK OK
SCROLL ESC
3. press or to confi rm
3. press or to confi rm
4. select YES to enable the function, NO to disable it
5. press or to confi rm
» * indicates active selection
» confi rmation tone