Comelit 3360 - 5. Call; 5 A. Enabling;disabling triple call; 5 B. Enabling;disabling the call confirmation tone

EN
25
This function is disabled by default.
It is possible to enable or disable the triple call made by Art.
3360 to the internal units.
The call will therefore take place on consecutive occasions
(in the case of video calls: the fi rst will be audio calls and the
third will be a video call)
1. access programming mode, see page 5
2. select the menu items:
Settings ⇒ System parameters ⇒ Speaker parameters
⇒ Advanced options ⇒ Call ⇒ Triple call
5. Call
5A. Enabling/disabling triple call
TRIPLE CALL
CONFIRMATION TONE
CODES BOOSTER
ANSWER WAIT TIME
OK OK
SCROLL ESC
TRIPLE CALL
YES
*NO
OK OK
SCROLL ESC
PARAMETER
CHANGED
5B. Enabling/disabling the call confi rmation
tone
This function is enabled by default.
1. access programming mode, see page 5
2. select the menu items:
Settings ⇒ System parameters ⇒ Speaker parameters
⇒ Advanced options ⇒ Call ⇒ Confi rmation tone
TRIPLE CALL
CONFIRMATION TONE
CODES BOOSTER
ANSWER WAIT TIME
OK OK
SCROLL ESC
CONFIRMATION TONE
YES
*NO
OK OK
SCROLL ESC
PARAMETER
CHANGED
3. press
or to confi rm
4. select YES to enable the function, NO to disable it
5. press or to confi rm
» * indicates active selection
» confi rmation tone
3. press
or to confi rm
4. select YES to enable the function, NO to disable it
5. press or to confi rm
» * indicates active selection
» confi rmation tone